Chili Powder Grinding Machine

We're here to help:
Easy ways to get the answers you need. Service Online

How To Ensure The Scientific Feeding Of Chili Powder Grinding Machine

Characteristics Of Three-Way Valve Plugging In Chili Powder Grinding Machine

The outlet temperature of the Chili Powder Grinding Machine rises rapidly at the speed of 1-2 ℃ / s, the current of the Chili Powder Grinding Machine drops rapidly from the original 95A to about 75A, and the differential pressure drops accordingly from the original 5.3kpa to 4.2kpa. There are very few materials in the mill. In case of such signs during operation, the mill shall be stopped immediately and the site shall be informed for treatment.

Sometimes when the operator sees this phenomenon, he mistakenly thinks that it is caused by the small amount of feed, so he increases the amount of feed. Or the Chili Powder Grinding Machine will continue to start grinding after stopping due to blocking vibration, which will not only fail to start grinding, but also cause greater damage to the accessories of the Chili Powder Grinding Machine.

Blocking Of Chili Powder Grinding Machine Vs Less Feeding Of Chili Powder Grinding Machine

The main difference between plugging and less feeding is the change of temperature, pressure difference and current. We take immediate stop grinding to reduce the vibration caused by the lack of material in the mill, and to prevent excessive material accumulation at the three valves. Long processing time will lead to longer grinding stop time. Generally, the materials blocked in the three-way valve are put into the mill. If the blocking time is short and there is less accumulated material in the three-way valve, the materials shall be cleaned into the mill and the mill can be started directly after the auxiliary turning gear is used. Generally, it can be handled in about 10 rain. If it is found late, the blocking time will be long, and the accumulated material in the three valves will increase. In serious cases, the material will block the three valves and accumulate on the belt in front of the three valves. Therefore, the grinding should be stopped in time.

The materials in the three-way valve need to enter the Chili Powder Grinding Machine for paving after being cleaned and grinded. Before entering the Chili Powder Grinding Machine, when grinding with the auxiliary transmission plate, it can be seen from the material level indicator plate that the thickness of the material layer in the mill is uneven. The thin part of the material layer is just 40mm, and the thick part is up to 170mm. If it does not enter the Chili Powder Grinding Machine to pave and start grinding again, it may cause the grinding roller to deviate from the original track. When directly entering the Chili Powder Grinding Machine for inspection, it will be found that there is a very high big material bag in the Chili Powder Grinding Machine, which should be paved. Before starting the mill, it is better to use the auxiliary transmission plate for one time. The operator can draw the air properly early according to the thickness of the material layer indicated by the material level indicator during turning. If necessary, the feeding amount can be reduced. When the differential pressure and current tend to be normal, the material can be added to normal.

Send A Message

You can get the price list and a SBM representative will contact you within one business day.